Posts tagged ‘ifconfig’
On Linux servers the status of NIC cards cannot be determined via the ipconfig command alone , in that case you could use one of the below commands to get the required infromation
# mii-tool eth0
# cat /sys/class/net/eth0/operatestate
# ethtool eth0
# ip link ls dev eth0
Source:https://linuxsupporttips.wordpress.com/2011/08/01/how-to-check-physical-network-link-status-on-linux-rhelcentos/
Good Luck .
Like this: Like Loading...
March 14, 2017 at 12:53 pm
Archives Archives
Select Month
May 2022 (2)
March 2022 (1)
February 2022 (1)
January 2022 (2)
December 2021 (1)
October 2021 (1)
September 2021 (1)
August 2021 (2)
July 2021 (1)
December 2020 (1)
November 2020 (1)
October 2020 (2)
September 2020 (7)
August 2020 (2)
June 2020 (3)
May 2020 (1)
March 2020 (3)
February 2020 (1)
December 2019 (1)
October 2019 (2)
September 2019 (1)
June 2019 (2)
April 2019 (1)
March 2019 (6)
February 2019 (1)
January 2019 (2)
December 2018 (1)
November 2018 (3)
October 2018 (5)
July 2018 (1)
June 2018 (1)
April 2018 (1)
March 2018 (1)
November 2017 (2)
October 2017 (2)
June 2017 (1)
March 2017 (2)
December 2016 (4)
October 2016 (1)
April 2016 (1)
May 2015 (2)
April 2015 (2)
February 2015 (1)
January 2015 (1)
December 2014 (2)
November 2014 (1)
September 2014 (1)
March 2014 (1)
February 2014 (2)
December 2013 (3)
November 2013 (3)
May 2013 (2)
April 2013 (2)
February 2013 (2)
January 2013 (7)
October 2011 (3)
September 2011 (1)
Categories
Hope you like it.. 